Heating Cleaning of Heat Conducting Oil Boiler

There are two methods for heating and cleaning of heat-conducting oil boilers, one is physical method and the other is chemical method. First, let's talk about the physical heating and cleaning method of the heat conducting oil furnace.
In fact, the physical method is to clean the dirt in the heating system manually. Now we use many methods, such as mechanical coke cleaning, high-pressure water jet cleaning and so on. This mechanical coke removal method is actually suitable for the diameter of plastic balls to accept the impetus of air, so that under the high-speed impetus of the furnace tube, it will scrape off the upper end of the tube wall coke.
High-pressure water jet cleaning him is actually when the tube is blocked, his high-pressure water will enter the tube, so that there will be coke in the tube, he will degum with the tube. But his price is also very expensive, in the high-pressure elbow, the water pressure will be significantly reduced.
Next let's talk about the chemical cleaning method: in the boiler heat conducting oil stove, we often use the new coke cleaning method. This method does not need to take the heat conducting oil stove apart or add any equipment. We can use the heat conducting oil stove to clean the heat conducting oil, then use the cleaning agent to clean the system, and heat it 105 degrees for 4 degrees. An eight-hour cycle allows coking of 10 mm thick heat conducting oil.